- Avoid moisture build-up and keep your home smelling fresh
- Available in 6", 8", 10", 12", and 14" duct diameters
- Offered in normally-open and normally-closed models
- Includes 24V AC transformer
- Used with a thermostat, or other switching device
As energy costs rise, it is important to find different solutions that help conserve energy and keep your heating and cooling expenses to a minimum. Because heaters and air conditioners are the largest energy consumers in homes today, one way to start reducing the use of energy is to install electronic air duct dampers. This 10-Inch Diameter Normally Open Electronic HVAC Air Duct Damper allows you to shut off airflow to unoccupied or unused rooms, which limits the flow of heated or cooled air to the areas that really need it. The airflow changes the temperature in the occupied areas faster than conventional air ducts, providing shorter run times for your heating and/or cooling system, allowing you to use less energy and save money. By adding one or more dampers you can create
zones throughout your home that can be electronically controlled by a
Thermostat, an
INSTEON Home Automation Device, or a Manual switch.
A 24V hard-wired power supply included.
Multi-Zone Control
Although it is possible to install N/O (normally open) Dampers into a multi-zone HVAC system, you may not find them tight or quiet enough. For these reasons, Netropolus recommends that you purchase the
Whisper-quiet series of premium electric Dampers for a multi-zone installation.
Single-zone control with your INSTEON Home Automation network
This electronic damper also offers the flexibility of being controlled from your
INSTEON Home Automation network by connecting a
plug-in 24V AC power supply to the damper and plugging it into an
ApplianceLinc. Once that connection has been made the damper can then be operated from any INSTEON controller, such as a
KeypadLinc,
SwitchLinc or
RemoteLinc; all items sold separately.
Single Zone Control with X10
For HVAC zone control using X10, connect the included hardwired power supply transformer between the damper and an X10 Universal Module. Once that connection has been made the damper can then be operated from any X10 device, such as a Mini Controller.
Available in Normally-Open or Normally-Closed models
When no power is supplied to the Normally Closed unit, the damper will be closed. When no power is supplied to the Normally Open unit, the damper will be open.
Wiring
For wiring between the damper and zone controller, damper and power supply, or zone controller and power supply, simply run a
2-conductor wire (18-22-gauge) between them.
Additional Sizes Available:
The 24V Motorized Dampers are available for 6", 8", 10", 12", and 14" duct diameters, and can be ordered in normally-open or normally-closed configurations.
What's Included
- 10-Inch Diameter Normally Open Electronic HVAC Air Duct Damper
- 24 Volt Power Supply Transformer
Specifications:
Manufacturer: Suncourt
Manufacturer Product No.: ZO110
Type: Normally Open
Power Requirements: 24V AC hardwired power supply (included)
Weight (pounds): 4.5
Diameter: 10"
Length: 10"
Operating Temperature: 40°F to 140° F
Power Consumption: .25 amps
Shopping Cart