Specifications:
Manufacturer: SmartLabs Design
Manufacturer Product No.: 2456S3T, TimerLinc - INSTEON Plug-in Timer
UPC: 718122389414
Patent No.: U.S. Patent No. 7,345,998, International patents pending
Color: White
Warranty: Two Years, limited
Operation
Status LED: White
Buttons: On / Off, Day, Mode (+/-), Set (+/-), OK, Reset, Set (on side)
Local Control: Available: Tap "On / Off" button to turn on and off controlled outlet and remote INSTEON devices; tap "Set" button (on side) to turn on controlled outlet only
Load Sensing: Available (Off by default): Turns on controlled outlet only
Operation Modes: INSTEON only, X10 only, INSTEON and X10 Combo Mode
Combo Mode Message Order: INSTEON, INSTEON confirmation, X10
Multi-Way Circuit Support: Yes
Setup Memory: Non-volatile EEPROM
Timer Features
Max # of Timers: 28 independent timers (14 On / 14 Off)
Timer Modes: Auto (timers enabled), Random (timers enabled w/ security interval), Manual (timers disabled)
Day of Week Support: Each timer can be set to activate: 1 day / week, everyday, weekdays, or weekends
Security Interval: Timers can be set to activate randomly +/- 30 minutes from scheduled time
Screen Type: 1" H x 1.4" W LCD
Clock Backup Battery: CR-2032 Coin Cell (Included) Approx. 2,500 hours (only used when TimerLinc not powered by AC). It is recommended to remove battery if TimerLinc is placed in storage.
INSTEON Features
INSTEON Addresses: 1 hard-coded out of 16,777,216 possible
INSTEON Links: 417
INSTEON Powerline Frequency: 131.65 KHz
INSTEON Minimum Transmit Level: 3.2 Vpp into 5 Ohms
INSTEON Minimum Receive Level: 10 mV
INSTEON Messages Repeated: Yes
Mechanical
Operating Conditions: Indoors, 40 to 132°F, up to 85% relative humidity
Dimensions: 4.0" H x 2.5" W x 1.7" D
Weight: 5.4 ounces
Electrical
Supply Voltage: 120 Volts AC +/- 10%, 60 Hertz, single phase
Surge Protection: MOV rated for 150 Volts
Compatible Load Types: Standard appliances up to 15 Amps and incandescent lights up to 480 watts
Power Plug: 3-pin grounded
Controlled Outlet: 3-pin grounded
Minimum Load: No minimum load required
Maximum Load: 15 Amps (for resistive loads); 480 Watts (for incandescent loads)
Certification: Safety tested for use in USA and Canada (ETL #3017581)
X10 Features
X10 Primary Address: One optional (comes unassigned)
X10 Scene Addresses: 255 possible
X10 Status Request: Supported
X10 Powerline Frequency: 120 KHz
X10 Minimum Transmit Level: 3.2 Vpp into 5 Ohms
X10 Minimum Receive Level: 10 mV
X10 Messages Repeated: No