Specifications:
Manufacturer: SmartLabs Design
Manufacturer Product No.: 2456D3, INSTEON LampLinc Dimmer (3-Pin)
UPC: 891114000051
Patent No.: U.S. Patent No. 7,345,998, International patents pending
Color: White
Warranty: 2 years, limited (Upgradeable to 7 years)
Operation
Status LED: White
On-Levels: 32 locally, increments of 1% with software
Ramp Rate (full-ON to full-OFF): 0.125 to 9 seconds if programmed locally, 0.125 seconds to 9 minutes if programmed remotely
Local Control: None
Load Sensing: Available (Off by default)
Operation Modes: INSTEON only, X10 only, INSTEON and X10 Combo Mode
Combo Mode Message Order: INSTEON, X10, INSTEON cleanup
Multi-Way Circuit Support: Yes, as a receiver only that controls a load
Setup Memory: Non-volatile EEPROM
INSTEON Features
INSTEON Addresses: 1 hard-coded out of 16,777,216 possible
INSTEON Links: 417 out of 16,777,216 possible
INSTEON Powerline Frequency: 131.65 KHz
INSTEON Minimum Transmit Level: 3.2 Vpp into 5 Ohms
INSTEON Minimum Receive Level: 10 mV
INSTEON Messages Repeated: Yes
Mechanical
Operating Conditions: Indoors, 32 to 122°F, up to 85% relative humidity
Dimensions: 4.0" H x 2.5" W x 1.5" D
Weight: 5 oz
Electrical
Supply Voltage: 120 Volts AC +/- 10%, 60 Hertz, single phase
Surge Protection: MOV rated for 150 Volts
Compatible Load Types: Plug-in incandescent lighting devices
Power Plug: 3-pin grounded
Pass-through Outlet: Uncontrolled 3-prong (with ground), 120V, 15A
Controlled Outlet: 3-pin grounded
Load Types: Plug-in incandescent lighting devices
Maximum Load 300 Watts
Minimum Load: 25 watts (for Local Control load sensing)
Certification: Safety tested for use in USA and Canada (ETL #3017581)
X10 Features
X10 Primary Address: 1 optional (comes unassigned)
X10 Scene Addresses: 255 possible
X10 Status Response: Supported
X10 Resume Dim: Supported (by setting X10 Primary Address On-Level to zero)
X10 Powerline Frequency: 120 KHz
X10 Minimum Transmit Level: 3.2 Vpp into 5 Ohms
X10 Minimum Receive Level: 10 mVpp nominal
X10 Messages Repeated: No